[New Device] Sapphire NITRO+ AMD Radeon™ RX 6600 XT -- add new device IDs to Sapphire GPU control ?

Name of device:

NITRO+ AMD Radeon™ RX 6600 XT

Link to manufacturer's product page:

https://www.sapphiretech.com/en/consumer/nitro-radeon-rx-6600-xt-8g-gddr6

Please select what type of device/interface the device uses:

DeviceTypeIDK DeviceTypeUSB DeviceType::GPUAMD DeviceType::GPUNVidia DeviceTypeSMBus DeviceTypeWMI

ID information:

Vendor:	Advanced Micro Devices, Inc. [AMD/ATI] [1002]
Device:	Navi 10 XL Upstream Port of PCI Express Switch [1478]
Rev:	c1
IOMMUGroup:	16
0a:00.0 VGA compatible controller [0300]: 

Advanced Micro Devices, Inc. [AMD/ATI] Navi 23 [**1002:73ff**] (rev c1) (prog-if 00 [VGA controller])

Subsystem: Sapphire Technology Limited Navi 23 [**1da2:e448**]

Please attach screenshots of the device's official control application here:

1_DashBoard_CustomJPG_Custom

Please attach device captures here:

identical to other sapphire nitro devices

Checklist for Step2

  • Name of device
  • A link to the vendors product page has been included
  • The transport bus has been identified and the appropriate label added to the issue.
  • The device ID's have been included for USB or PCI
  • Screenshots of the OEM Application are included
  • There is either, appropriate code examples linked or suitable device captures attached
Edited by J J