[New Device] ASUS ROG STRIX ARION M.2 NVMe SSD Enclosure

Name of device:

ASUS ROG STRIX ARION M.2 NVMe SSD Enclosure

Link to manufacturer's product page:

https://rog.asus.com/storage/rog-strix-arion-model/

Please select what type of device/interface the device uses:

DeviceTypeUSB

ID information:

found this with wireshark in DEVICE DESCRIPTOR
idVendor: ASUSTek Computer, Inc. (0x0b05)
idProduct: Unknown (0x1932)

Please attach screenshots of the device's official control application here:

I used this sofware Asus Aura for the captures with wireshark.

Please attach device captures here:

turning the light from white to off on-to-off.pcapng

turning the light on to white off-to-on.pcapng

turning the light from white to red R255G255B255-to-R255G0B0.pcapng

turning the light from red to green R255G0B0-to-R0G255B0.pcapng

turning the light from green to blue R0G255B0-to-R0G0B255.pcapng

Notes from me:

I know that this device is not very common and therefor the integration is not much requested.
Personally I want to control the rgb of the ssd enclosure via a commandpormt.
Since The OpenRGB Project already supports other Asus aura sync products perhaps you can help me to figure out the commands for this device as well.
I totally understand that you prioritize other issues anyway I highly appreciate any help on how to archive this.

Checklist for Step2

• Name of device
• A link to the vendors product page has been included
• The transport bus has been identified and the appropriate label added to the issue.
• The device ID's have been included for USB or PCI
• Screenshots of the OEM Application are included
• There is either, appropriate code examples linked or suitable device captures attached